Month: March 2016

Magnetically Actuated Guide-wire Steering

  By , ,

Project Goals


Guide wires are commonly used to assist surgeons during vascular surgery. Guide wires are usually the first to be placed, eventually allowing easy exchange of surgical tools to the target site. The surgeon has to manually control and manipulate the guide wire to the target region. This process is complicated by the tortuous nature of the vasculature and is made worse as the surgeon has limited vision (constant need to switch between overlay angiographs) and control over the guide wire tip (controlling the distal tip from the proximal end). For the first time towards minimally invasive Arteriovenous Fistula Angioplasty Procedures, we aim to improve the controllability of the in vivo guide wire via the attachment of a magnetic tip to the distal end of the guide wire, which under the control of external magnetic field generators can deflect the magnetic tip. This controlled deflection translates to the selection of entrance angle for the guide wire tip, affording distal control.
This is especially useful for navigating around stenosis which is common for patients with Arteriovenous(AV) Fistula. The repeated use of the fistula during dialysis has been claimed as a cause for the high occurrence of stenosis (due to tissue scaring from access). Fistulas and their grafts are however still preferred over other renal access in most situation due to its lower risk of infections. Our proposed system here can improve the controllability, safety and speed of current procedures and can enable AV-Fistula Angioplasty Procedures to be shifted to out-patient clinics.

Approaches/Results/Videos

People Involved

Student: Bok Seng Yeow
Research fellow: Jinji Sun
Project Investigators: Hongliang Ren, Jackie Ho

Related Publications

Yeow, B. S.; Sun, J.; Ho, J. & Ren, H. Towards Magnetically Actuated Guide-wire Steering in Arteriovenous Fistula Angioplasty Procedures IEEE Conference on Real-time Computing and Robotics (RCAR), IEEE, 2016, best student paper.

Body-Attached Soft Robot for Ultrasound Imaging

  By ,

Project Goals

Ultrasound imaging procedures are deemed as one of the most convenient and least invasive medical diagnostic imaging modalities and have been widely utilized in health care providers, which are expecting semiautomatic or fully-automatic imaging systems to reduce the current clinical workloads. This paper presents a portable and wearable soft robotic system which has been designed with the purpose of replacing the manual operation to cooperatively steer the ultrasound probe. This human-compliant soft robotic system, which is equipped with four separated parallel soft pneumatic actuators and is able to achieve movements in three directions. Vacuum suction force is introduced to attach the robot onto the intended body location. The design and fabrication of this soft robotic system are illustrated. To our knowledge, this is the first body-attached soft robot for compliant ultrasound imaging. The feasibility of the system is demonstrated through proof-of-concept experiments.
softusprobe

Approaches/Results/Video

Developing a wearable soft robotic system (Figure 1), which is capable of mimicking the procedure of probe steering and optimizing the contact force and angle according to the specific conditions, has great significance of reducing the reliance of the ultrasound imaging on the experience of operators and obtaining images with high quality.

People Involved

PhD Student:ย Xiaoyi Gu
FYP Student: Koon Lin Tan
Project Investigator: Hongliang Ren

Related Publications

Ren, H.; Gu, X. ; Tan, K. L. Human-Compliant Body-Attached Soft Robots Towards Automatic Cooperative Ultrasound Imaging 2016 20th IEEE International Conference on Computer Supported Cooperative Work in Design (CSCWD 2016), IEEE, 2016, –

Positions for part-time undergraduate Research Assistants (RA)

  By

The part-time research positions are to support a funded project on the study of a computer integrated surgery system. The successful applicants will involve hands-on development for surgical robot prototype or surgical navigation system study based on their backgrounds. The successful applicants will also be exposed to the other interesting research projects in surgical robotic system development.

Position Responsibilities:

Assist in the development of a computer integrated surgery system.
Closely collaborates with the PI and other research assistants throughout the study.
Write experiment reports.
Learn to manage the project.

Qualifications:

Prior clinical knowledge is not required but would be a plus.
Experience with mechanical design or computer programming.
Self-motivated.
Willing to learn and work independently.
Strong problem-solving, interpersonal, and analytic skills.
To apply, please email a detailed CV (including education background, courses, experiences, and skills) to:
Dr. REN, Hongliang